|
|
发表于 2008-10-12 10:45:19
|
显示全部楼层
目 录
1 简介 2
1.1 目的 2
1.2 适用范围 2
1.3 责任 2
2 手册内容 3
2.1 测试项目 3
2.1.1 电性能测试 3
2.1.2 ESD测试 3
2.1.3 软件功能测试 3
2.1.4 用户试用 3
2.1.5 场地测试 3
2.1.6 环境测试 3
2.1.7 寿命测试 3
2.1.8 机械强度测试 3
2.1.9 包装成品测验 4
2.1.10 其它测试 4
2.1.11 附件（旅充、座充、电池、耳机）测试 4
3 测试标准 5
3.1 电性能测试标准 5
3.2 功能/软件测试 5
3.3 用户试用 5
3.4 场地测试 5
3.5 ESD静电测试 5
3.6 环境测试 6
3.7 寿命测试 7
3.8 机械强度测试 8
3.9 其它测试 8
3.10 包装成品测试 9
1 简介
1.1 目的
制定整机中试过程中的测试标准。
1.2 适用范围
本手册适用于中试过程中的整机。
1.3 责任
中试工程师、品质工程师。
....
Table of Contents:
1. INTRODUCTIONS 3
1.1 Purpose 3
1.2 References 3
1.3 Definitions 3
1.4 Abbreviations 3
2. TEST METHODS 4
2.1 Visual 4
2.1.1 Inspection gauges 4
2.1.2 Polarization test 12
2.1.3 Visual inspection 14
2.2 Measurements 15
2.2.1 4-wire resistance measurements 15
2.2.2 Optical measurements 16
2.2.3 Gloss measurement 19
2.2.4 Color measurement 20
2.2.5 Surface micro roughness, Rq 20
2.2.6 Surface flatness 21
2.2.7 Thermal cooling for TSM 21
2.2.8 Determination of harmful compounds 25
2.3 Thermal 26
2.3.1 Change of temperature 26
2.3.2 Steady temperature test for TSM 27
2.3.3 Ageing test for AC-Charger materials 29
2.4 Chemical 31
2.4.1 Damp heat cyclic 31
2.4.2 Solvent resistance test 33
2.4.3 Chemical stain test 36
2.4.4 Salt mist endurance of materials 38
2.4.5 Chemical resistance of chargers 40
2.4.6 Residual stress test 42
2.4.7 Condensing Water Test Atmospheres 45
2.5 Radiation 47
2.5.1 UV exposure 47
2.6 Mechanical 48
2.6.1 Adhesion test with Grid-method for coated/painted surfaces 48
2.6.2 Wearing endurance 51
2.6.2.1 Vibratory wearing (product) 51
2.6.2.2 Wearing test (materials) 53
2.6.3 Scratch test for surfaces 56
2.6.3.1 Nokia test 56
2.6.3.2 Rod test 58
2.6.4 Free fall 59
2.6.5 Free fall repeated 62
2.6.6 Ball Drop Test 63
2.6.7 Extreme force resistance test 65
2.6.8 Safety test for glass windows 67
2.6.9 Static compression test for TSM 68
1. INTRODUCTIONS
1.1 Purpose
This document describes material- or component-level test methods. All specified tests described in this manual needs to be done and pass before approving supplier or approving new type of sample / tecnology or in case of any changes in sample (e.g. material) or in a manufacturing process. Quality control related issues e.g. test cases shall be described in product specified document.
1.2 References
• STR for materials
• SPR a – Product Reliability, Caliber RM Tool, SPR Project
• SPR a – Verification Guideline 2, DTS08047-EN-3.0
• SPR a – Verification Guideline 3, DTS08048-EN-3.0
• Integration Level Test Methods, Integration Level guideline Part 2/3, DMK01471-EN
1.3 Definitions
Laboratory environment: In these tests defined as T = + 20 – 25 °C and RH = 40 – 60 %
NTP: Normal temperature and pressure see laboratory environment
Room temperature: The same as Laboratory environment
.......... |
|
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡