跪求ＣｙｃｌｏｎｅＩＩ芯片实现SPI串口协议的传输速度上限是多少？

mdy521

跪求ＣｙｃｌｏｎｅＩＩ芯片实现SPI串口协议的传输速度上限是多少？


我想用CycloneII芯片EP2C20F256C8做一个SPI串口协议，我需要的串口传输速率达到15Mbits/s，不知道Cyclone II的芯片能不能实现呀？Cyclone II的芯片实现SPI串口协议的传输速率上限是多少？[52RD.com]
[52RD.com]
   我昨晚在Altera的主页上看到用Cyclone ＩＩ芯片做串口ＳＰＩ协议速度达不到，上限只有１ＭＢｉｔｓ／ｓ，而我选的数模转换器ＡＤ５６6８要求的输入端串口传输速率是４８ＫＨｚ＊32ｂｉｔｓ＊８＝15Ｍｂｉｔｓ／ｓ，这可能无法在ＣｙｃｌｏｎｅＩＩ的ＦＰＧＡ上实现这么高速度的串口协议，它仅仅能完成到１Ｍｂｉｔｓ／ｓ．今天上午跟艾睿北京代理打了个电话咨询了一下，他们说估计是有问题的。下午又跟骏龙北京代理打了一个电话，他们又说可以，你的速度太低了，肯定没问题的。我现在都晕了，到底谁家说的对呀？下面是ａｌｔｅｒａ网页关于ＣｙｃｌｏｎｅII的串口描述：[52RD.com]
Serial Bus Interfaces[52RD.com]
Cyclone II devices support a variety of serial bus interfaces such as serial peripheral interface (SPI), inter-integrated circuit (I2C), IEEE 1394 standard, and universal serial bus (USB) (shown in Table 2).[52RD.com]
Table 2. Serial Bus Interface Support in Cyclone II Devices  [52RD.com]
Protocol                                               SPI        I2C          IEEE 1394         USB 2.0 [52RD.com]
Maximum Bandwidth (Mbps)            1           3.4              400                    480 [52RD.com]
[52RD.com]
Note:[52RD.com]
Maximum bandwidth is equal to or greater than the data rate. [52RD.com]
The SPI and I2C standards can be implemented in Cyclone II devices to provide low-speed communication links between integrated circuits, processors and peripherals. The IEEE 1394 and USB standards provide connections between processors, computers, and other devices. Cyclone II devices can be used to implement the bus controllers and interface with the PHY devices. All these serial bus interfaces are typically used in price-sensitive consumer products. The Cyclone II device family provides an ideal low-cost solution for implementing the standards and custom functions in these applications.

yongzong

当然够 我看50Mbit/S都没问题[em01]

frankwang

1M bit/s 肯定沒問題
實際拿一個SPI module 放進去，然後跑simulation看速度可以到多快
你說的Altera 的網頁我看過，描述的確有點怪
不過若USB 2.0 480Mbps (data rate)都能達到，SPI上限只有1Mbps說不過去