MTK综测结果Ripple Range 2 Not tested 对应在CFG哪里可以设置？

liqiquan2002 · 发表于 2016-10-28 10:32:34

本帖最后由 liqiquan2002 于 2016-10-28 10:34 编辑

[TX Test Case 46][TX Test Case 46]    Band 41    MCS 0    Uplink UARFCN 25930    Bandwidth 2
TX Power 18.209    MAX 21    MIN 17    PASS
EVM
EVM (%rms) 1.806    MAX 10    MIN 0    PASS
Magnitude Error (%) 1.313    MAX 10    MIN 0    PASS
IQ Offset (dB) -47.293    MAX -20    MIN -100    PASS
Frequency Error(ppm) 0.004    MAX 0.1    MIN -0.1    PASS
Phase Error (degree) 0.71    MAX 3    MIN -3    PASS
ACP(ACLR)
Lower Offset EUtra - relative power -48.043    MAX -30    MIN -100    PASS
Upper Offset EUtra - relative power -40.914    MAX -30    MIN -100    PASS
Lower Offset Utra1 - relative power -53.795    MAX -33    MIN -100    PASS
Upper Offset Utra1 - relative power -41.067    MAX -33    MIN -100    PASS
Lower Offset Utra2 - relative power -51.528    MAX -36    MIN -100    PASS
Upper Offset Utra2 - relative power -51.803    MAX -36    MIN -100    PASS
SEM
SEM    PASS
Delta foob    Offset 1    Offset 2    Offset 3    Offset 4
Lower Peak Power -49.36 -33.772 -47.664 -46.967
Lower Peak Delta -35.86 -25.272 -36.164 -23.467
Upper Peak Power -28.992 -29.977 -45.449 -46.624
Upper Peak Delta -15.492 -21.477 -33.949 -23.124
Ripple Flatness
Ripple Range 1    PASS
Ripple Range 2    Not tested
Ripple Range 1 to 2    Not tested
Ripple Range 2 to 1    Not tested

liqiquan2002 · 发表于 2016-10-28 11:08:36

综测报错，请问什么原因？

		自动登录	找回密码
密码			注册

[讨论] MTK综测结果Ripple Range 2 Not tested 对应在CFG哪里可以设置？

本帖子中包含更多资源