|
|
1. o TI_1 (DB_8): difference between CUST5 and TI 1001 MCU-L1 code
o TI_2 (DB_9): TCHTH error accumulation problem, no accumulation performed on FACCH boundaries.
o TI_3 (DB_10): Summary of DSP patch releases for DSP = 4
o TI_4 : Wrong accumulated power results for saturated carriers (full list power measurements)
o TI_5 : Wrong initilialisation of VEGA clock in TPU drivers for RF=5
o TI_6 (HO_1): Incorrect type used for param_tab
o TI_7 : L1S task scheduler is not called to update “time_to_next_l1s_task” when the active task is aborted by L1A
o TI_8 : d_eot_state variable in API-DB is no more used
o TI_9 : The TSP register TSP_ACTX is not reset to zero, when the function l1dmacro_reset_hw() is executed. This register is used for RF I/F on EVA4
o TI_10 : Restructuring of L1 directories for custom functions
o TI_11 : On Hercules the TPU_SLEEP command takes 2qbit compared to 1qbit for Gemini
o TI_12 : Wrong result for full list power measurements when more than one measurement is carried out per TDMA frame
o TI_13 : Sometimes after power-on, or after a deep sleep/wakeup process the IT-COM is not received by the DSP
o TI_14 : Problem with full list power measurements in DUALEXT mode (EGSM/DCS).
o TI_15 : Wrong result for power measurements in dedicated mode with negative RXLEV
o TI_16 : Problem to synchronize on E-GSM carrier 975
o TI_17 : Wrong type for accumulated result of full list power measurements
o TI_18 : L1 ALR with power management
o TI_19 : Inversion of the UL/DL balance variables dedicated to the respective audio level of the regular TCH speech and the Voice Memo
o TI_20 : Spec mistake on CBCH configuration message description
1. Upgrade of MCU version numbers, where PB are solved
2. o TI_21 : Speech loopback not functional for ALR S/W
3. o TI_22 : l1a_l1s_com.last_input_level[ ] can never be updated during dedicated mode if beacon is not present in the BA_LIST. Solution is: beacon must be in the BA_LIST (S922 update).
o T_23 : a) first_block_1 is type UWORD16. Correction made in T_MPHC_CBCH_SCHEDULE_REQ and T_MPHC_CBCH_UPDATE_REQ
b) num_of_chans in T_MPHC_UPDATE_BA_LIST structure can be of type UWORD8
c) Editorial error made on sb_flag definition in T_MPHC_NCELL_SB_READ structure: b_flag defined instead of sb_flag.
d) MPHC_STOP_CBCH_CON ID not defined (in include/l1_signa.h)
4. o TI_24 : L1A state machine locked into state. SB search results during FB result state.
o TI_25: Same development version number names for ALR/GPRS.
5. o TI_26: Configuration and activation of the ULPD : need to be defined by layer1 team for a better implementation.
6. o TI_27: Handover Failure Testcases (26.6.5.8 and 26.6.5.9).
7. o Added Summary table.
o TI_28: Release L1 object 0x1225 not upgraded with OMEGA ramps
o TI_29: Missing Init. of IDS control words in API (NDB)
o TI_30: Wrong format of AGC bands returned by custom function l1ctl_encode_delta2
o Enhanced the pb report sheet to allow different L1 code identification.
8. o TI_31: index not initialized in l1pddsp_transfer_mslot_power( ). For fixed txpwr (l1_config.tx_pwr_code == 0), a_ctrl_power_gprs<I> must be assigned directly with l1_config.params.fixed_txpwr.
o TI_32: Overflow of current_calibrated_IL variable is possible under error conditions<B><I><I>.
以上是问题列表，详细内容太多，无法上传，如有需要留信箱给我</I></I></I></B> |
|
IP卡
狗仔卡
发表于 2005-4-19 19:33:00
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡