低功耗BANDGAP 设计

Dawney

【文件名】:06523@52RD_low_power_bandgap.rar
【格　式】:rar
【大　小】:160K
【简　介】:LOW VOLTAGE and low power are two important design criteria in both the analog and digital systems. It is expected that the whole system will be able to operate down to a single 1-V supply in the near future. A voltage reference, as one of the core functional blocks in both analog and digital systems,should be able to operate from a single 1-V supply for both systems.
【目　录】:
I. INTRODUCTION
In CMOS technology, a parasitic vertical bipolar junction
II. PROPOSED SUB-1-V BANDGAP VOLTAGE REFERENCE IN CMOS TECHNOLOGY
III. EXPERIMENTAL RESULTS
IV. COMPARISON WITH OTHER REPORTED LOW-VOLTAGE BANDGAP REFERENCES
V. CONCLUSION