工艺库的选择

Adelaide

【文件名】:06510@52RD_wilson_paper.rar
【格　式】:rar
【大　小】:138K
【简　介】:You have just been given a new project with plenty of designers and a firm specification.Everything looks great EXCEPT you don’t have a foundry yet. It is a big decision to decide which vendor to give your chip design to in order to make an ASIC. Do you go with a full service ASIC house or just a foundry? Do you use their library or a third party’s library?
These are just some of the many decisions that must be made before you get a piece of silicon back to put in your system. This paper will describe the alternatives that are available and suggest some criteria that may be useful in selecting an ASIC vendor as well as an ASIC library.Remember, not all synthesis libraries are created equal.
【目　录】:
1. Introduction
2. Use a full service vendor or a foundry using COT
3. Fab Vendor Logistics and Decision Criteria
4. There is more to an ASIC than a synthesis library
5. How to pick a good synthesis library and library vendor
6. Basic requirements of a synthesis library
7. Common Library modeling Mistakes
8. How to evaluate a synthesis library and process collateral
9. Conclusions and Recommendations
10. Acknowledgements
11. About the author