RFD21733产品应用

yangzhuo712

大家好，
       我是杨小姐，你司这一款RFD21733产品主要就用于ZIGBEE模块上面的。有需要可以联系我。0755-86173841/13410328007。18818798007，QQ：764239122。
RFD21733 IC / FCC APPROVED
15mm x 15mm (0.600 inch x 0.600 inch)
RFD21733 / RFD21735 is a complete, READY-TO-USE wireless solution with it's
built-in user application interface (RFDP8). Includes RFID, ESN, Logic Switch
Transmitter / Receiver, 9600,N,8,1 Serial UART and many easy-to-use addressable
network modes. No development required at all, no RF layout, no code writing, all
features are built-in. Be up and running with a full wireless solution in minutes.
Applications
• Active RFID
• Long Range RFID
• Remote Control
• Light Controls
• Home Automation
• Alarm Security
• Keyless Entry
• Perimeter Monitoring
• PC Keyboard Security
• Wireless Keyboard
• Wireless Mouse
• TV Remote
• Home Stereo Remote
• Asset Tracking
• Wireless PTT
• Remote Switches
• Remote Terminals
• Wireless RS232 DB9
• Wireless RS485
• Temperature Control
• HV/AC
• Meter Reading
• Data Acquisition
• Inventory Control
• Keyfob Remotes
• Industrial Controls
• Vending Machines
13715 Alton Pkwy • Irvine • CA • 92618
Tel: 949.610.0008 • Fax: 949.610.0009
www.rfdigital.com • sales@rfdigital.com
2
© Copyright,
RF Digital Corp.
5/5/2011 9:34 PM
Patents Pending
RoHS
RFD21733
IC / FCC APPROVED
RFDP8
RFDANT RF Module
RFD21743 RFD21733
RFD21740 RFD21735
RFD21737
RFD21738
RFD21739
ETSI • CE Compliant
• Runs on a single coin cell for years.
• WiFi interference tolerant.
• Bluetooth interference tolerant.
• Zigbee interference tolerant.
• Very low cost.
• No external parts required.
• No RF layout required.
• Easy and ready-to-use, hand-held, eval and application boards available.
• Ultra small 15mm x 15mm footprint.
• Fully contained, truly a finished, ready to use module.
• CE / ETSI / IC & FCC Certified and Approved.
• Typical range outdoor; 300 feet (100 meters), indoor 100 feet (33 meters).
• Worldwide 2.4GHz ISM band operation.
• User configurable without need for any programming.
• 2uA Ultra low power modes.
• Only 14mA current consumption at 0dbm RF power output.
• Only 17mA current consumption at -94 dBm receive sensitivity.
• 16 bit CRC data accuracy verification built-in.
• 32 bit unique factory ESN in every module (4 billion combination security).
• Flexible network modes, including broadcast and individual addressing.
• Optional version available for use with external antenna (RFD21735).
• Switch on/off, logic, remote-control without the need for an external controller.
• Switch nodes individually addressable without the need for an external controller.
• Wide supply range +1.9V to +3.6V.
• Built-in, high performance internal antenna (RFD21733).
• Peer to Peer (Ad-Hoc) networks and configurations.
• Point to Multi-Point networks and configurations.
• Multi-Point to Multi-Point networks and configurations.
• Selective addressing of any module by using factory built-in ESN.
• Fast-turn-around, minimal latency (20 millisecond).
• Patent pending RFDP8 interference tolerant protocol.
• Full application protocol runs transparent to the user.
• Easy to use, simple to design in.
• Stores up to 60 ESNs (Electronic Serial Numbers) for network modes.
• Many to one data modes ideal for multi-point data acquisition.
• Unlimited number of module nodes can communicate to each other.
RFD21733 / RFD21735 Features
RF Digital's RFDP8
application firmware
loaded into the
RFD21733 / RFD21735
modules can be
customized to fit
application specific
user requirements.
RF Digital can design
and manufacture fully
custom modules to fit
specific customer
requirements.
If you do not find what
you're looking for, feel
free to contact
RF Digital with your
requirements.
Custom Modules
RFDP8 Application Protocol • Mode Selector Chart
See below

yangzhuo712

hand-held, eval and application boards available.
• Ultra small 15mm x 15mm footprint.
• Fully contained, truly a finished, ready to use module.
• CE / ETSI / IC & FCC Certified and Approved.
• Typical range outdoor; 300 feet (100 meters), indoor 100 feet (33 meters).
• Worldwide 2.4GHz ISM band operation.
• User configurable without need for any programming.
• 2uA Ultra low power modes.
• Only 14mA current consumption at 0dbm RF power output.
• Only 17mA current consumption at -94 dBm receive sensitivity.
• 16 bit CRC data accuracy verification built-in.
• 32 bit unique factory ESN in every module (4 billion combination security).
• Flexible network modes, including broadcast and individual addressing.
• Optional version available for use with external antenna (RFD21735).
• Switch on/off, logic, remote-control without the need for an external controller.
• Switch nodes individually addressable without the need for an external controller.
• Wide supply range +1.9V to +3.6V.
• Built-in, high performance internal antenna (RFD21733).
• Peer to Peer (Ad-Hoc) networks and configurations.
• Point to Multi-Point networks and configurations.
• Multi-Point to Multi-Point networks and configurations.
• Selective addressing of any module by using factory built-in ESN.
• Fast-turn-around, minimal latency (20 millisecond).
• Patent pending RFDP8 interference tolerant protocol.
• Full application protocol runs transparent to the user.
• Easy to use, simple to design in.
• Stores up to 60 ESNs (Electronic Serial Numbers) for network modes.
• Many to one data modes ideal for multi-point data acquisition.
• Unlimited number of module nodes can communicate to each other