|
|
发表于 2011-8-7 17:26:38
|
显示全部楼层
Class 01
1. 根据ID效果图，电池盖的颜色是褐色的。
2. 作业员不小心把背胶贴在了PCBA错误的一面。
3. 供应商应按照我们的图纸来准备样品。
4. 我们排组装时间要把品管检测的时间考虑进去。
5. 除流道设计外，排气也是塑胶件成型的一个重要因素。
6. 另外，请确认所有的刻字都做在公模仁上了。
7. 我们预先做了结构设计以能尽早开模。
8. 要使结构做得更好，利用所有工程师的专业意见是个好方法。
9. 首先，在做壳体设计和器件选择时要考虑跌落测试。
10. 毕竟，模流分析只是给你一个参考，而不是一个确实可行的方案。
1.According to the ID rendering, the color of battery cover is brown.
According to：根据
2.The operator placed the adhesive on the wrong side of the PCBA by accident.
by accident：偶然，不小心。
3.The supplier should prepare these samples in accordance with our drawings.
In accordance with: 与...一致, 依照
4.When we make assembly schedule, we have to take the time for quality inspection into account.
take ... into account：考虑
5.In addition to runner design, venting is also a very important factor for plastic parts molding.
In addition t: o除...之外
6.Additionally, please make sure that all the markings are made on the core.
Additionally：另外
7.We did some ME design in advance to launch the tooling as soon as possible.
in advance：事先,在前,预先
8.To make the design better, taking advantage of the expertise of all the engineers is a good way.
take advantage of : 利用
9.Above all, drop test need to be considered well for housing design and component selection.
Above all: 首先, 尤其
10.After all, moldflow analysis can only give you a reference, not a practical solution.
After all: 毕竟, 虽然这样 |
|
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡