|
R&S音频测试说明,需要的可以看看
【文件名】:11121@52RD_UPL-B9_1E.pdf
【格 式】:pdf
【大 小】:271K
【简 介】:R&S音频测试说明
【目 录】:
Acoustic Measurements on Mobile Phones
1 Overview
The acoustic transmission and reproduction quality of a mobile phone is its
most important characteristic in everyday use. The most visually appealing
design or a wonderfully sophisticated operating concept are not much use,
when the user cannot or can hardly understand what is being said at the
other end.
Instruments and methods for measuring acoustic characteristics are therefore
essential tools for assessing the quality and suitability of a mobile phone.
Special test mobile phones have so far been required for type-approval testing.
The special Audio Analyzer UPL16 performs all audio measurements in line
with chapter 30 of GSM 11.10 on special mobile phones under test with a digital
audio interface (DAI).
Since a digital audio interface is no longer required even for type-approval tests
on 3rd generation mobile phones, new test methods had to be developed
allowing to perform measurements via the air interface and the normal voice
coder and decoder. The test signals have to simulate human voice in the
frequency and time domain to be able to test the mobile phone in the normal
operating mode with DSP assessment like VAD (voice activity detector), noise
suppression, echo canceller and so on switched on.
These tests are based on new standards for 3GPP mobile phones. The test
methods are stipulated in 3GPP TS 26.132 and the values to be attained in
3GPP TS 26.131.
As of release 4 of the GSM 51.010 standard (successor to GSM 11.10), even
GSM mobile phones may be tested to 3GPP TS 26.132.
The UPL-B9 option (3G Mobile Phone Tests) of the Audio Analyzer UPL is now
available for measuring the acoustic characteristics of 3GPP and GSM mobile
phones. The measurements are in line with 3GPP TS 26.131, TS 26.132 and
TS 51.010 and have been validated by an independent test house for type-
approval testing.
1154.7530.14 1 |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?注册
×
|