layout学习的新手问问题

pigdragon

【文件名】:10611@52RD_新建文件夹.zip
【格　式】:zip
【大　小】:35K
【简　介】:出问题的原理图
【目　录】:


资料见附件，我是新手，对封装还有些不熟悉，胡乱做个原理图来测试，结果出现pcb和原理图不一致的问题，有报错


Reading file --  C:\PADS Projects\padsnet.asc
Part name already used U1
U1      LM324@LM324-14PIN
Part name already used C1
C1      CAP-CC05@CK05
Part name already used C2
C2      CAP-CC05@CK05
Part name already used C3
C3      CAP-CC05@CK05
Part name already used C4
C4      CAP-CC05@CK05
Part name already used T1
T1      XFR-TA-10-08@DALE-TA-10-08
Mixing nets $$$26280 C1 1 $$$26277 U1 1
C1.1 U1.1IN+
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal $$$26280
Mixing nets $$$26324 C3 1 $$$26320 U1 3
C3.1 U1.3IN+
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal $$$26324
Mixing nets $$$26332 C4 2 VCC U1 4
C4.2 U1.4IN-
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal $$$26332
Mixing nets $$$26334 U1 4 VCC U1 4
U1.4IN+ C4.1
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal $$$26334
Mixing nets $$$26343 U1 2 $$$26340 U1 2
U1.2IN+ C2.1
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal $$$26343
Warning: deleting signal $$$26280
Warning: deleting signal $$$26324
Warning: deleting signal $$$26332
Warning: deleting signal $$$26334
Warning: deleting signal $$$26343
**INPUT WARNINGS FOUND**

请朋友们帮忙看一下问题的原因，谢谢！

pigdragon

我做的封装有问题，有个概念没有搞清楚，现在明白了

layoutpcb

新手上路啊

xiaoyang_ups

我也是新手啊

mengzhifei

新手来学习！