打破RFID垄断，MSTAR RFID读写及标签IC展示。

sammyguo

MSTAR

• MSR3100 NFC IC

􀂉HF RFID reader：Supports ISO 15693　ISO 18000-3　ISO 14443A　ISO 14443B
　NFC mode：　NFCIP-1, NFCIP-2,ISO 18092
Peer to Peer communication　：Data rate from 106k up to 848kbps
􀂉Built-in 8051 Microcontroller　64KB Program SRAM　16KB Program ROM　4KB RAM
􀂉 Interface：USB1.1　I2C　SPI　UART　GPIO(10 pins)　
Frequency: 13.56MHz ± 7KHz
Low power consumption　Low standby current: <200 uA
2.5V – 3.6V operation voltage
Small QFN40 (6x6) package


&#8226; MSR3200 HF tag chip

　Standard Compliance:
ISO15693 ;
ISO 18000-3 Mode 1
&#1048713; Operation Frequency: 13.56MHz ± 7KHz
&#1048713; Memory : 1024 bits
&#8226; 64 bits Read Only UID
&#8226; 800 bits(25 blocks) user data
&#8226; Support Read, Write, Lock command for AFI, DSFID, Block, EAS data
&#8226; 32 bits factory-programmed Tag Owner ID reserved for customer
(customer can write IP address into chip for internet access and
query)
&#8226; 64 bits user password to protect data access
&#8226; Proprietary Commands: Write Password, Lock Password,
Secure_Read_Blk, Secure_Write_Blk