Manual MTF PRO3_4 change settings for 3_axis controller

panghqu · 发表于 2007-10-19 12:41:20

TRIOPTICS MTF
ImageMaster 安装使用手册

panghqu · 发表于 2007-10-19 12:47:25

【文件名】:071019@52RD_Manual PRO 3_4_change settings for 3_axis controller.pdf
【格　式】:pdf
【大　小】:1276K
【简　介】:Short Manual PRO 3 / 4
Change Setting for 3-axis controller
Changing the acceleration of the stages
1. Close the ImageMaster PRO software
2. Switch on the 3 axis controller “L-Step” and switch on “Auto”
3. Open the link on the desktop called “WIN-Commander”
4. Connect the 3 axis-controller to the PC by using this settings
【目　录】:

		自动登录	找回密码
密码			注册

[资料] Manual MTF PRO3_4 change settings for 3_axis controller

本帖子中包含更多资源