SKYWORKS平台布线准则

longlm

Layer stack-up (assume a 6 layer board)

Layer 1 -RF traces and Components
Layer 2 - GND
Layer 3 - Signal
Layer 4 - Signal
Layer 5 - GND
Layer 6 - RF traces (and components if needed)

If it is difficult to have a complete ground layer, it is recommended that good solid ground plane be maintained under CX74017 and RF traces.

【文件名】:06612@52RD_SKYWORKS_DCR Layout Recommendations.doc
【格　式】:doc
【大　小】:28K
【简　介】:
【目　录】: