找回密码
 注册
搜索
查看: 2009|回复: 7

[讨论] MT6620P WIFI 11G中间信道 EVM问题

[复制链接]
发表于 2012-12-14 14:03:31 | 显示全部楼层 |阅读模式
Enter into META Mode OK
        ================WiFi Test Start===================
WIFI Tester is: IQVIEW
6620d

====================== WiFi TX power check begin =====================
========FREQ 2412MHz,DAC 34,Rate:11.0=========
EVM PASS: 9.04(<20.00 %)
Frequency tolerance: 0.68 ppm PASS(+/-10.00)
TX Power (Pass):10.1 min =8.0,max =15.0
===========11B RX=====================11B RX==========
Set SG output level:-76.0!
ch:2412,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2442MHz,DAC 34,Rate:11.0=========
EVM PASS: 7.10(<20.00 %)
Frequency tolerance: 0.90 ppm PASS(+/-10.00)
TX Power (Pass):9.7 min =8.0,max =15.0
===========11B RX=====================11B RX==========
Set SG output level:-76.0!
ch:2442,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2472MHz,DAC 34,Rate:11.0=========
EVM PASS: 8.17(<20.00 %)
Frequency tolerance: 0.77 ppm PASS(+/-10.00)
TX Power (Pass):10.6 min =8.0,max =15.0
===========11B RX=====================11B RX==========
Set SG output level:-76.0!
ch:2472,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2412MHz,DAC 30,Rate:54.0=========
EVM PASS:-31.62dB(<-25.00 dB)
Frequency tolerance: -1.84 ppm PASS(+/-10.00)
TX Power (Pass):8.4 min =5.0,max =12.0
===========11G RX=====================11G RX==========
Set SG output level:-66.0!
ch:2412,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2442MHz,DAC 30,Rate:54.0=========
EVM FAIL:-22.27dB(<-25.00 dB)
Frequency tolerance: 3.05 ppm PASS(+/-10.00)
TX Power (Pass):6.5 min =5.0,max =12.0
===========11G RX=====================11G RX==========
Set SG output level:-66.0!
ch:2442,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2442MHz,DAC 30,Rate:54.0=========
EVM FAIL:-22.10dB(<-25.00 dB)
Frequency tolerance: -0.65 ppm PASS(+/-10.00)
TX Power (Pass):6.6 min =5.0,max =12.0[/COLOR]
===========11G RX=====================11G RX==========
Set SG output level:-66.0!
ch:2442,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

========FREQ 2472MHz,DAC 30,Rate:54.0=========
EVM PASS:-33.22dB(<-25.00 dB)
Frequency tolerance: 1.25 ppm PASS(+/-10.00)
TX Power (Pass):8.8 min =5.0,max =12.0
===========11G RX=====================11G RX==========
Set SG output level:-66.0!
ch:2472,PER Result: 0.000(rx ok:1000,CRC:0),limit:0.50

=============FAIL : WiFi Final Test ====================

        WiFi Testing Time:64.19 (sec)
 楼主| 发表于 2012-12-14 14:07:28 | 显示全部楼层
哪位大侠看看啊
点评回复

使用道具 举报

发表于 2013-4-24 11:18:49 | 显示全部楼层
没用过MTK的方案,但从你测量的数据看,54M的速率高中低单个信道的功率将近2dB,如果你芯片本身的性能是OK的话,得调试。athor的芯片有bdata文件可以调,如果发射的功率超过芯片本身的发射极限功率的话,EVM是会恶化的,EVM本身和layout,匹配等有关
点评回复

使用道具 举报

发表于 2013-4-23 16:14:59 | 显示全部楼层
要找专业人士看
点评回复

使用道具 举报

发表于 2014-1-12 16:14:43 | 显示全部楼层
匹配明显没调好,功率不平坦啊
点评回复

使用道具 举报

发表于 2014-9-26 10:41:26 | 显示全部楼层
学习了!谢谢各位大大!
点评回复

使用道具 举报

发表于 2016-2-15 15:47:46 | 显示全部楼层
谢谢楼主分享
点评回复

使用道具 举报

发表于 2016-2-16 13:39:09 | 显示全部楼层
感谢分享
点评回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies

本版积分规则

Archiver|手机版|小黑屋|52RD我爱研发网 ( 沪ICP备2022007804号-2 )

GMT+8, 2024-11-21 00:30 , Processed in 0.046062 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表