share with you
【文件名】:10119@52RD_ADSL-Layout Design Checklist_V11.doc
【格 式】:doc
【大 小】:686K
【简 介】:
【目 录】:
Put the decoupling CAP close to the IC power pin of the device being bypass
Put SDRAM far away the analog area.
Check no components overlap
Place the crystal and its associated capacitors as closely as possible to the DSP.
Place passive resistors and capacitors associated with the AFE close to their connection pins on the AFE in order to minimize trace lengths and crosstalk.
IP卡
狗仔卡
发表于 2010-1-19 15:01:15
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡