录音用的人工头里的人工耳难道不用加coupler吗？？

penguinq

最近公司在帮一个客户做录音用的人工头，大抵是因为想把人头及耳朵的影响以及左右耳的影响都考虑进去。但是我不明白的是，既然已经做的这么多了，为什么不在人工耳里面加一个711或者318的耦合腔呢？直接是一个type3.3的耳廓，然后耳道中就是麦克风，根本没有coupler.我觉得这非常不合理。
所以我想请教一下大家，是不是所有的人工头里面的人工耳都应该是结合耦合腔、麦克风以及耳廓，而不只是麦克风+耳廓。
还是说录音这件事有什么特殊 的要求

loon1234

里面用的是自由场麦克风
在远场的情况下
你一定是在远场的情况录音
所以不用coupler~
这个非常正常
录音不要求有太精确的DRP/ERP修正[br]<p align=right><font color=red>+1 RD币</font></p>

bxcwy

给你一个学术研究上常用的人工头配置：
Q8. How was KEMAR configured?

The mannequin head and torso is usually referred to simply as KEMAR
(Knowles Electronics Mannequin for Acoustics Research). The Mannequin
head and torso is model DB-4004 (which includes model DB-062 head and
model DB-127 torso). The torso was equipped with two neck rings
(included with model DB-4004).  The pinnae come in small (model DB-060 =
right, DB-061 = left) and "large-red" (model DB-065 = right, DB-066 =
left) sizes. For our measurements, the left pinna was model DB-061, and
the right pinna was model DB-065 (see Q10). The ears were fitted with
canal extensions (model DB-050, one for each ear) that couple to the
occluded ear simulators (model DB-100, one for each ear). The occluded
ear simulators are Zwislocki couplers that simulate the terminating
impedance of the eardrum. 'Eardrum' pressure was measured with Etymotic
Research ER-11 microphones (which come with preamplifiers). The
preamplifiers were set to have flat equalization (no diffuse-field
equalization).

penguinq

[em10]事隔这么久,才看到楼上两位仁兄的回答,非常感谢,要是当时才发布的时候就看到就好了.