求助，美光MT9D111的CAPTURE MODE~

yanzhe127

MT9D111的CAPTURE MODE,如何配置still啊
captureParams.mode 参数的Capture mode
Bit 0—capture with Xenon flash (still only)
Bit 1—capture video
Bit 2— reserved
Bit 3—AF On (video only)
Bit 4—AE On (video only)
Bit 5—AWB On (video only)
Bit 6—HG On (video only)
是不是把Bit 1复位就好了，可是没有抓帧啊，还是按video输出。是不是还要别的配置，本人新手第一次做这个~