找回密码
 注册
搜索
查看: 548|回复: 0

深圳某奥地利手机公司猎头职位

[复制链接]
发表于 2009-6-9 18:11:39 | 显示全部楼层 |阅读模式
大家好!我是猎头顾问杜娟!希望通过这个平台推荐一些好的工作机会给大家,请大家跟我联系!

请发送简历或联系我 dujuanjoan47@hotmail.com QQ:1178022944  

深圳某奥地利手机公司的职位如下:

猎头职位一:
RF Hardware Design Engineer for Mobil Phones, Senior

Tasks:

·        Elaboration of RF hardware specifications according product requirements; development of RF hardware according specification; schematic creation; hardware simulation with EDA software; building and measuring prototypes; carrying out approvals;
·        Support of the PCB design team in the component selection, layout, placement and routing phase

Requirements:

·        Masters degree with thesis in the field of RF hardware preferred
·        Minimum 3 – 5 years experience in RF hardware design
·        Knowledge in the concepts of receiver, transmitter and antenna technology
·        Knowledge in the characteristics and measurement of typical building blocks such as filters, LNA′s, mixers, RF-power amplifiers, PLLs, IF amplifiers, demodulators, oscillators etc.
·        Knowledge in the requirements for excellent PCB layout for RF circuits.
·        Experienced in carrying out measurements with RF signal generators, spectrum analyzers, network analyzers etc.
·        Experience with RF design / simulation software such as Agilent ADS or Ansoft Designer
·        Experience with EM design / simulation software such as Ansoft HFSS or Zeeland IE3D
·        Basic system knowledge: Bluetooth, GSM, CDMA …
·        Experience in building up prototypes,
·        Fluent in written and spoken english
·        Understanding international quality requirements, customer awareness
·        Ability to achieve results, meet deadlines, and adjust to quickly changing priorities in a fast-paced development environment
·        Structured workflow
·        Teamplayer
·        Person who keeps himself up to date regarding technological trends and developments
Familiar with Infineon ULC1 / ULC2 chipsets!!!

猎头职位二:
Baseband Hardware Design Engineer with RF knowledge for Mobil Phones, Senior   

工作描述 – 高级手机射频/基带硬件设计工程师

Tasks:

任务

·        Elaboration of RF/BB hardware specifications according product requirements; development of RF hardware according specification; schematic creation; hardware simulation with EDA software; building and measuring prototypes; carrying out approvals;
·        针对产品要求,研究产品规格;根据产品规格,设计原理图;用EDA软件做仿真;设计原型机调试。
·        Support of the PCB design team in the component selection, placement and routing phase
·        支持layout做器件选择,布局确定,以及制定走线规则。

Requirements:
要求

·        Masters degree with thesis in the field of RF hardware
·        射频相关硬件技术研究生学历
·        Minimum 3 – 5 years experience in hardware design for mobil phones
·        3-5年GHz以上高频硬件设计经验
·        Good knowledge about baseband design.
·        熟悉基带设计
·        Experience with Infineon ULC1 / ULC2 and/or NXP chip sets.
·        有Infineon 和/或者NXP平台工作经验
·        Knowledge in the concepts of receiver, transmitter and antenna technology;
·        精通天线,以及相关的发送,接受技术
·        Knowledge in the characteristics and measurement of typical building blocks such as filters, LNA′s, mixers, RF-power amplifiers, PLLs, IF amplifiers, demodulators, oscillators etc.
·        精通典型硬件电路,比如filters, LNA′s, mixers, RF-power amplifiers, PLLs, IF amplifiers, demodulators, oscillators等的测试
·        Knowledge in the requirements for PCB layout.
·        有丰富的RF电路布局经验
·        Experienced in carrying out measurements with RF signal generators, spectrum analyzers, network analyzers etc.
·        有信号,频谱,网络分析经验
·        Rich experience in solving EMC, ESD problems during design and debug .
·        丰富的EMC,ESD设计以及整改经验
·        Experience in acoustic design and debug.
·        有声学设计以及整改的经验。
·        Basic system knowledge: Bluetooth, GSM, CDMA …
·        对蓝牙,CDMA有基本的了解
·        Experience in building up prototypes; soldering; desoldering etc
·        有调试,安装,以及焊接等技能
·        Fluent in spoken and written english
·        精通英语
·        Understanding international quality requirements, customer awareness
·        能理解到国外客户的品质,以及客户要求。
·        Ability to achieve results, meet deadlines, and adjust to quickly changing priorities in a fast-paced development environment
·        在开发过程中,能随机应变,并且能很好的按期提供交付物
·        Structured workflow and Teamplayer
·        遵守工作流程,以及团队合作
·        Person who keeps himself up to date regarding technological trends and developments
对掌握新的技术以及相关的发展方向有着兴趣。

猎头职位三:
PCB Layout Engineer for Mobil Phones, Senior


Tasks:
-         Shall undertake complete layouts for mobil phones from schematic level;
-         shall undertake the complete design of a standard multilayer PCB using industry standard CAD tools;
-         shall understand the schematics and basic functionality;
-         shall have an overview of electronic packaging and be able to plan placement based on the signal flow;
-         shall identify the design requirements from schematic / datasheets / customer guidelines and ensure a smooth design flow;
-         shall address analog, and digital designs; shall understand the DFx needs and ensure that the same are built into the design practices;
-          shall take ownership of the entire design delivery. Work in close liason with the quality department to ensure  “zero defect“ designs.

Requirements:
-         Diploma in engineering with 3-4 year experience in mobil phone industry, or a Bachelor’s Degree in Electronics with 2 years experience.
-         Should have undertaken complete design to final delivery using any of the PCB CAD tools.
-         Should have worked on ULC1 / ULC2 designs before (perfect would be if he already attend the infineon hardware training on ULC2)
-         Should be conversant with the industry design standards like IPC and any corporate design standards.
-         Should have complete understanding of the PCB manufacturing process and should have the ability to read component datasheets and asses the impact on the PCB design process – thermal, electrical and manufacturability / assembly issues.
-         Should have good mechanical knowledge as to understand the various mounting issues and component positional influence as governed by the product design.
-         Should be capable of understanding the impact of the design on the final product.
-         A good spoken and written English would be an advantage
-         Should be able to provide daily status report on design activity, issues to be resolved and design optimisation recommendations if any.

猎头职位四:
SW Engineer for MMI and Middle Ware with Focus on Driver Development for Mobil Phones.

Tasks:
·        Driver development
·        Design and develop GSM MMI software
·        Middleware and Firmware integration

Requirements:
·        Masters or bachelors degree in software engineering
·        Working experience (3-5 years) in software design on embedded system with over 2 years in mobile phone design
·        Knowledge and working experience with Infineon chipset (ULC1/2) and OSE (real time operating system)
·        Professional in C and C++ programming
·        Middleware and Firmware integration
·        Fluent in written and spoken English is an advantage
高级模式
B Color Image Link Quote Code Smilies

本版积分规则

Archiver|手机版|小黑屋|52RD我爱研发网 ( 沪ICP备2022007804号-2 )

GMT+8, 2024-11-29 20:31 , Processed in 0.054712 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表