设为首页收藏本站

 找回密码
 注册
搜索
52RD研发论坛»论坛 › 手机研发论坛(Cell Phone R&D Forum) › 手机测试 › MTK_ATE校准大部分功率校不过(2)
返回列表 发新帖回复
查看: 2215|回复: 18

[讨论] MTK_ATE校准大部分功率校不过(2)

[复制链接]
发表于 2008-5-16 18:50:44 | 显示全部楼层 |阅读模式
大家好。[52RD.com]
用MTK_ATE校准的时候，大部分功率校不过。以下是result：[52RD.com]
APC Calibration time=20.62(sec)[52RD.com]
[52RD.com]
GSM PCL 19 = 5.03 PASS,Max :6.50 Min :3.50[52RD.com]
GSM PCL 18 = 5.68 PASS,Max :8.50 Min :5.50[52RD.com]
GSM PCL 17 = 6.60 FAIL,Max :10.50 Min :7.50[52RD.com]
GSM PCL 16 = 7.59 FAIL,Max :12.50 Min :9.50[52RD.com]
GSM PCL 15 = 8.91 FAIL,Max :14.50 Min :11.50[52RD.com]
GSM PCL 14 = 10.48 FAIL,Max :16.50 Min :13.50[52RD.com]
GSM PCL 13 = 12.13 FAIL,Max :18.50 Min :15.50[52RD.com]
GSM PCL 12 = 14.12 FAIL,Max :20.50 Min :17.50[52RD.com]
GSM PCL 11 = 16.32 FAIL,Max :22.50 Min :19.50[52RD.com]
GSM PCL 10 = 18.54 FAIL,Max :24.50 Min :21.50[52RD.com]
GSM PCL 9 = 21.06 FAIL,Max :26.50 Min :23.50[52RD.com]
GSM PCL 8 = 23.93 FAIL,Max :28.50 Min :25.50[52RD.com]
GSM PCL 7 = 26.95 FAIL,Max :30.50 Min :27.50[52RD.com]
GSM PCL 6 = 29.36 FAIL,Max :32.50 Min :29.50[52RD.com]
GSM PCL 5 = 32.12 PASS,Max :34.50 Min :30.50[52RD.com]
DCS PCL 15 = 1.27 PASS,Max :2.00 Min :-1.00[52RD.com]
DCS PCL 14 = 1.92 PASS,Max :3.50 Min :0.50[52RD.com]
DCS PCL 13 = 2.24 FAIL,Max :5.50 Min :2.50[52RD.com]
DCS PCL 12 = 3.01 FAIL,Max :7.50 Min :4.50[52RD.com]
DCS PCL 11 = 3.76 FAIL,Max :9.50 Min :6.50[52RD.com]
DCS PCL 10 = 4.87 FAIL,Max :11.50 Min :8.50[52RD.com]
DCS PCL 9 = 6.33 FAIL,Max :13.50 Min :10.50[52RD.com]
DCS PCL 8 = 7.98 FAIL,Max :15.50 Min :12.50[52RD.com]
DCS PCL 7 = 9.86 FAIL,Max :17.50 Min :14.50[52RD.com]
DCS PCL 6 = 11.73 FAIL,Max :19.50 Min :16.50[52RD.com]
DCS PCL 5 = 14.18 FAIL,Max :21.50 Min :18.50[52RD.com]
DCS PCL 4 = 16.84 FAIL,Max :23.50 Min :20.50[52RD.com]
DCS PCL 3 = 19.82 FAIL,Max :25.50 Min :22.50[52RD.com]
DCS PCL 2 = 23.12 FAIL,Max :27.50 Min :24.50[52RD.com]
DCS PCL 1 = 25.87 FAIL,Max :29.50 Min :26.50[52RD.com]
DCS PCL 0 = 29.15 PASS,Max :31.50 Min :28.50[52RD.com]
手机无问题，RF线无问题，我怀疑是ATE配置或设置有问题，请大侠们指点为谢。
回复

使用道具 举报

 楼主| 发表于 2008-5-16 18:51:23 | 显示全部楼层
CFG文件
[META version]
META version= ver 5.0

[8960 Initialization]
8960 GPIB Address =GPIB0::15::INSTR
Time Out =5000
GSM400 cable loss = -0.5
GSM850 cable loss = -0.5
GSM900 cable loss = -0.5
DCS1800 cable loss = -0.8
PCS1900 cable loss = -0.8

[CMU200 Initialization]
CMU200 GPIB Address =GPIB0::20::INSTR
Time Out =5000
GSM400 input cable loss = 0.5
GSM850 input cable loss = 0.5
GSM900 input cable loss = 0.5
DCS1800 input cable loss = 0.8
PCS1900 input cable loss = 0.8
GSM400 output cable loss = 0.5
GSM850 output cable loss = 0.5
GSM900 output cable loss = 0.8
DCS1800 output cable loss = 1.2
PCS1900 output cable loss = 1.2

[Frequency Bank]
;bank = 0x02
;bank = 0x1E
;bank = 0x04
bank = 0x0C
; GSM450 0x01
; GSM850 0x02
; GSM900 0x04
; DCS1800 0x08
; PCS1900 0x10

[C0 for each Bank]
arfcn_C0_GSM = 65
arfcn_C0_DCS = 700
arfcn_C0_PCS = 660
arfcn_C0_GSM850 = 190

[Downlink power]
P_DL = -60

[RX measurement samples]
N_PM = 5
M_PM = 4

[AFC Calibration]
;AFC_BAND: GSM, DCS, PCS, GSM850
AFC_BAND = GSM
AFC_ARFCN = 62
N_AFC = 10
DAC1=4000
DAC2=5000
CRYSTAL_DAC1=3000
CRYSTAL_DAC2=5000

[AFC table]
MAX_INIT_AFC_DAC = 7000
MIN_INIT_AFC_DAC = 2000
MAX_AFC_SLOPE = 8.0
MIN_AFC_SLOPE =1.0

[Crystal AFC Calibration]
;CRYSTAL_AFC_BAND: GSM, DCS, PCS, GSM850
CRYSTAL_AFC_BAND = GSM
CRYSTAL_AFC_ARFCN = 65
CRYSTAL_AFC_GSM850_PCL  = 12
CRYSTAL_AFC_GSM900_PCL  = 12
CRYSTAL_AFC_DCS1800_PCL = 7
CRYSTAL_AFC_PCS1900_PCL = 7
CRYSTAL_AFC_CAL_DAC = 4096
CRYSTAL_AFC_CHECK_DAC1 = 0
CRYSTAL_AFC_CHECK_DAC2 = 8191
CRYSTAL_AFC_MIN_FREQ_ERR_PPM = -15.0
CRYSTAL_AFC_MAX_FREQ_ERR_PPM = 15.0
CRYSTAL_AFC_MAX_AFC_TRACK_INIT_FREQ_ERR = 50.0
CRYSTAL_AFC_FREQ_ERR_MEASUSE_COUNT = 10
CRYSTAL_AFC_TRX_OFFSET_RECURSIVE_TIMES = 20

[RX path loss table]
GSM850_MAX_RX_LOSS = 4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.5000,
GSM850_MIN_RX_LOSS = -4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.5000,

GSM900_MAX_RX_LOSS = 4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,
GSM900_MIN_RX_LOSS = -4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.5000,

DCS1800_MAX_RX_LOSS = 4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.5000,
DCS1800_MIN_RX_LOSS = -4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.5000,

PCS1900_MAX_RX_LOSS = 4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.500,4.5000,
PCS1900_MIN_RX_LOSS = -4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.500,-4.5000,


[IP2 table]
IP2_arfcn_C0_GSM850 = 220
IP2_arfcn_C0_GSM = 100
IP2_arfcn_C0_DCS = 730
IP2_arfcn_C0_PCS = 690
;Skyworks 74045, 74117, 74400
IP2_CAL_P_DL_ON_SKY = -30
IP2_CAL_P_DL_OFF_SKY = -120
;MT6139, MT6140
IP2_CAL_P_DL_ON_MT = -25
IP2_CAL_P_DL_OFF_MT = -120
IP2_GAIN = 65
IP2_N_PM = 200
IP2_M_PM = 4
;Skyworks 74045
IP2_ICORRECTION1_SKY74045 = -40       
IP2_QCORRECTION1_SKY74045 = -40
IP2_ICORRECTION2_SKY74045 =  40
IP2_QCORRECTION2_SKY74045 =  40
;Skyworks 74117, 74400
IP2_ICORRECTION1_SKY74117 = -40
IP2_QCORRECTION1_SKY74117 = -40
IP2_ICORRECTION2_SKY74117 =  40
IP2_QCORRECTION2_SKY74117 =  40
IP2_AMCODEI1 = 64
IP2_AMCODEQ1 = 64
IP2_AMCODEI2 = 191
IP2_AMCODEQ2 = 191
IP2_MAX_IDC_SKY74045 = 50
IP2_MAX_QDC_SKY74045 = 50
IP2_MAX_IDC_SKY74117 = 50
IP2_MAX_QDC_SKY74117 = 50
IP2_MAX_IDC_MT6139 = 50
IP2_MAX_QDC_MT6139 = 50
IP2_CHECK_P_DL_ON = -30
IP2_CHECK_P_DL_OFF = -120


[TX IQ table]
TX_IQ_MEASUREMENT_COUNT = 100
;TX_IQ_BAND: GSM, DCS, PCS, GSM850
TX_IQ_BAND = GSM
TX_IQ_ARFCN = 65
TX_IQ_PCL = 19
TX_IQ_DC_OFFSET_MAX = -45
TX_IQ_GAIN_IMBALANCE_MAX = -30
; The following setting is for MT6140B
TX_IQ_BAND_HIGH = DCS
TX_IQ_ARFCN_HIGH = 711
TX_IQ_PCL_HIGH = 10
TX_IQ_DC_OFFSET_MAX_HIGH = -42
TX_IQ_GAIN_IMBALANCE_MAX_HIGH = -40

[TX PCL table]
GSM850_CAL_PCL = 17, 12, 5,
GSM850_2CAL_PCL = 19, 5,
GSM850_PCL    = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,                        
GSM850_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,                     
GSM850_MAX_P = 6, 8, 10,12,13.8,15.8,17.8,19.8,21.8,23.8,25.8,27.8,29.5,31,32.8,
GSM850_WANTED_P = 5.2,7,9,11,13,15,17,19,21,23,25,27,29,30.5,32.2,               
GSM850_MIN_P = 4,6,8,10,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,28.5,30,31.7   
GSM850_C = 4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,                                
GSM850_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,  

GSM850_EPSK_CAL_PCL = 12, 10, 6,
GSM850_EPSK_2CAL_PCL = 19, 5,  
GSM850_EPSK_4CAL_PCL = 19,14,12,8,                     
GSM850_EPSK_PCL    = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,                        
GSM850_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,                     
GSM850_EPSK_MAX_P = 5.5, 7.5, 9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,27.5,27.5,27.5,27.5,
GSM850_EPSK_WANTED_P = 5.2,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5,26.5,               
GSM850_EPSK_MIN_P = 4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.3,26.3,26.3,26.3,
GSM850_EPSK_C = 3,3,3,3,3,5,5,5,5,5,5,5,5,5,5,5,                              
GSM850_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,      

GSM900_CAL_PCL = 17, 12, 5,
GSM900_2CAL_PCL = 19, 5,
GSM900_PCL    = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,
GSM900_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,
;GSM900_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,
GSM900_MAX_P = 6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,28.5,30.5,32.5,34.5,
GSM900_WANTED_P = 5,7,9,11,13,15,17,19,21,23,25,27,29,30.5,32.2,
;GSM900_MIN_P = 4,6,8,10,12,14,16,18,20,22,24,26,28,30,31,
GSM900_MIN_P = 3.5,5.5,7.5,9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,27.5,29.5,30.5,
GSM900_C = 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,
GSM900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

GSM900_EPSK_CAL_PCL = 12, 10, 6,
GSM900_EPSK_2CAL_PCL = 19, 5,
GSM900_EPSK_4CAL_PCL = 19,14,12,8,
GSM900_EPSK_PCL    = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,
GSM900_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,
GSM900_EPSK_MAX_P = 5.5, 7.5, 9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,27.5,27.5,27.5,27.5,
GSM900_EPSK_WANTED_P = 5,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5,26.5,
GSM900_EPSK_MIN_P = 4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.3,26.3,26.3,26.3,
GSM900_EPSK_C = 3,3,3,3,3,5,5,5,5,5,5,5,5,5,5,5,
GSM900_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,


DCS1800_CAL_PCL = 13, 8, 1,
DCS1800_2CAL_PCL = 15, 0,
DCS1800_PCL    = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
DCS1800_CHECK_PCL  = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
;DCS1800_MAX_P = 1.8,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31,
DCS1800_MAX_P = 2,3.5,5.5,7.5,9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,27.5,29.5,31.5,
DCS1800_WANTED_P = 1.2,2.5,4.3,6.2,8,10,12,14,16,18,20,22,24,26,27.5,29.2,
;DCS1800_MIN_P = -0.5,1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,
DCS1800_MIN_P = -1,0.5,2.5,4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,28.5,
DCS1800_C = 3,3,3,3,3,3,5,5,5,5,5,5,5,5,5,5,
DCS1800_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

DCS1800_EPSK_CAL_PCL = 8, 6, 2,
DCS1800_EPSK_2CAL_PCL = 15, 0,
DCS1800_EPSK_4CAL_PCL = 15,8,6,2,
DCS1800_EPSK_PCL    = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
DCS1800_EPSK_CHECK_PCL  = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
DCS1800_EPSK_MAX_P = 0.5, 2.5, 4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,26.5,26.5,
DCS1800_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,24,25.5,25.5,25.5,
DCS1800_EPSK_MIN_P = -0.5,1.5,3.5,5,7,9,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.3,25.3,25.3,
DCS1800_EPSK_C = 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
DCS1800_EPSK_CORRECTION =  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

PCS1900_CAL_PCL = 13, 8, 1,
PCS1900_2CAL_PCL = 15, 0,
PCS1900_PCL    = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
PCS1900_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
PCS1900_MAX_P = 2, 3.5, 5,7,9,11,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,28,31,
PCS1900_WANTED_P = 1.2,2.5,4.3,6.2,8,10,12,14,16,18,20,22,24,26,27.5,29.0,
PCS1900_MIN_P = -0.5,1.5,3.5,5,7,9,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25,26.7,28.5,
PCS1900_C = 3,3,3,3,3,5,5,5,5,5,5,5,5,5,5,5,
PCS1900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

PCS1900_EPSK_CAL_PCL = 8, 6, 2,
PCS1900_EPSK_2CAL_PCL = 15, 0,
PCS1900_EPSK_4CAL_PCL = 15,8,6,2,
PCS1900_EPSK_PCL    = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
PCS1900_EPSK_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0,
PCS1900_EPSK_MAX_P = 0.5, 2.5, 4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,26.5,26.5,
PCS1900_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,24,25.5,25.5,25.5,
PCS1900_EPSK_MIN_P = -0.5,1.5,3.5,5,7,9,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.3,25.3,25.3,
PCS1900_EPSK_C = 3,3,3,3,3,3,5,5,5,5,5,5,5,5,5,5,
PCS1900_EPSK_CORRECTION =  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

TSC=5
Recursive Times=100
APC Delta=0.1
SKY77328_DAC_Delta=10
SKY77328_GSM850_M  = 16.8
SKY77328_GSM850_TARGET_PCL  = 19
SKY77328_GSM850_MAX_HIGH_APC_DC_OFFSET_P = -3.5
SKY77328_GSM850_WANTED_HIGH_APC_DC_OFFSET_P  = -4
SKY77328_GSM850_MIN_HIGH_APC_DC_OFFSET_P = -4.5
SKY77328_GSM850_MAX_LOW_APC_DC_OFFSET_P = -3.5
SKY77328_GSM850_WANTED_LOW_APC_DC_OFFSET_P = -4
SKY77328_GSM850_MIN_LOW_APC_DC_OFFSET_P = -4.5
SKY77328_GSM900_M  = 16.8
SKY77328_GSM900_TARGET_PCL  = 19
SKY77328_GSM900_MAX_HIGH_APC_DC_OFFSET_P = -3.5
SKY77328_GSM900_WANTED_HIGH_APC_DC_OFFSET_P  = -4
SKY77328_GSM900_MIN_HIGH_APC_DC_OFFSET_P = -4.5
SKY77328_GSM900_MAX_LOW_APC_DC_OFFSET_P = -3.5
SKY77328_GSM900_WANTED_LOW_APC_DC_OFFSET_P = -4
SKY77328_GSM900_MIN_LOW_APC_DC_OFFSET_P = -4.5
SKY77328_DCS1800_M = 17.78
SKY77328_DCS1800_TARGET_PCL = 15
SKY77328_DCS1800_MAX_HIGH_APC_DC_OFFSET_P = -3.5
SKY77328_DCS1800_WANTED_HIGH_APC_DC_OFFSET_P = -4
SKY77328_DCS1800_MIN_HIGH_APC_DC_OFFSET_P = -4.5
SKY77328_DCS1800_MAX_LOW_APC_DC_OFFSET_P = -3.5
SKY77328_DCS1800_WANTED_LOW_APC_DC_OFFSET_P = -4
SKY77328_DCS1800_MIN_LOW_APC_DC_OFFSET_P = -4.5
SKY77328_PCS1900_M = 17.78
SKY77328_PCS1900_TARGET_PCL = 15
SKY77328_PCS1900_MAX_HIGH_APC_DC_OFFSET_P = -3.5
SKY77328_PCS1900_WANTED_HIGH_APC_DC_OFFSET_P = -4
SKY77328_PCS1900_MIN_HIGH_APC_DC_OFFSET_P =-4.5
SKY77328_PCS1900_MAX_LOW_APC_DC_OFFSET_P = -3.5
SKY77328_PCS1900_WANTED_LOW_APC_DC_OFFSET_P = -4
SKY77328_PCS1900_MIN_LOW_APC_DC_OFFSET_P = -4.5





[ADC table]
ADC_V1 = 3400
ADC_V2 = 4200
ADC_CHECK_VOLTAGE = 3600
NORMAL_VOLTAGE = 3800
CURRENT_LIMIT = 3000
MAX_BATTERY_ADC_SLOPE = 5550
MIN_BATTERY_ADC_SLOPE = 5250
MAX_BATTERY_ADC_OFFSET = 1000000
MIN_BATTERY_ADC_OFFSET = -1000000
BATTERY_CHANNEL = 0
CHARGER_CHANNEL = 1
ADC_RESISTANCE = 0.4
MAX_VOLTAGE_DIFFERENCE = 0.04
MAX_CURRENT_DIFFERENCE = 0.04
ADC_MEASUREMENT_COUNT = 1000
点评回复

使用道具 举报

 楼主| 发表于 2008-5-16 18:52:27 | 显示全部楼层
.ini文件
[META version]
META version= ver 3.7.02

[GSM900 Sub band, RX loss]
Max ARFCN=15,30,40,50,60,70,80,95,110,124,1000,1023loss=0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.0000
[DCS1800 Sub band, RX loss]
Max ARFCN=550,580,610,640,670,700,730,760,790,820,850,885
RX loss=0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.0000

[AFC control]
Initial value=3959
Slope=6.6710

[GSM900 level, ramp]
APC dc offset=168
Low APC dc offset=0
APC lowest power=0
TX power level=45,64,85,109,136,167,200,239,281,334,392,458,532,614,683,683
profile 0 ramp up=0,0,0,0,0,90,80,55,65,145,219,255,255,255,255,255
profile 0 ramp down=255,255,239,197,138,78,32,10,0,0,0,0,0,0,0,0
profile 1 ramp up=0,0,0,0,0,90,80,50,60,145,219,255,255,255,255,255
profile 1 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 2 ramp up=0,0,0,0,0,0,70,40,60,145,219,255,255,255,255,255
profile 2 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 3 ramp up=0,0,0,0,0,0,80,30,30,100,145,219,255,255,255,255
profile 3 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 4 ramp up=0,0,0,0,0,0,60,30,25,80,145,219,255,255,255,255
profile 4 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 5 ramp up=0,0,0,0,0,0,100,60,55,65,145,219,255,255,255,255
profile 5 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 6 ramp up=0,0,0,0,0,0,80,60,50,60,135,219,255,255,255,255
profile 6 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 7 ramp up=0,0,0,0,0,0,70,60,50,60,135,219,255,255,255,255
profile 7 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 8 ramp up=0,0,0,0,0,0,70,50,30,65,135,200,150,255,255,255
profile 8 ramp down=255,239,197,138,0,0,0,0,0,0,0,0,0,0,0,0
profile 9 ramp up=0,0,0,0,0,0,60,20,30,70,135,160,255,255,255,255
profile 9 ramp down=255,239,197,138,0,0,0,0,0,0,0,0,0,0,0,0
profile 10 ramp up=0,0,0,0,0,0,60,20,20,60,135,180,255,255,255,255
profile 10 ramp down=255,239,197,138,0,0,0,0,0,0,0,0,0,0,0,0
profile 11 ramp up=0,0,0,0,0,0,60,20,20,60,135,150,255,255,255,255
profile 11 ramp down=255,239,197,138,0,0,0,0,0,0,0,0,0,0,0,0
profile 12 ramp up=0,0,0,0,0,0,60,20,20,60,135,150,255,255,255,255
profile 12 ramp down=255,239,197,100,0,0,0,0,0,0,0,0,0,0,0,0
profile 13 ramp up=0,0,0,0,0,0,60,20,20,60,140,150,255,255,255,255
profile 13 ramp down=255,239,197,130,0,0,0,0,0,0,0,0,0,0,0,0
profile 14 ramp up=0,0,0,0,0,0,20,20,25,65,145,219,255,255,255,255
profile 14 ramp down=255,239,197,138,0,0,0,0,0,0,0,0,0,0,0,0
profile 15 ramp up=0,0,0,0,0,0,0,20,20,25,65,145,219,255,255,255
profile 15 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
Subband max arfcn=40,82,124,1000,1023,-1,0,0,0,0,0
Subband mid level=11,11,11,11,11,11,11,11,11,11,11
Subband high weight=1.000,1.000,0.980,1.010,1.010,1.000,1.000,1.000,1.000,1.000,1.0000
Subband low weight=1.020,1.020,1.020,1.030,1.030,1.000,1.000,1.000,1.000,1.000,1.0000
Battery compensate, low voltage, low temperature=1.000000
Battery compensate, low voltage, mid temperature=1.000000
Battery compensate, low voltage, high temperature=1.000000
Battery compensate, mid voltage, low temperature=1.000000
Battery compensate, mid voltage, mid temperature=1.000000
Battery compensate, mid voltage, high temperature=1.000000
Battery compensate, high voltage, low temperature=1.000000
Battery compensate, high voltage, mid temperature=1.000000
Battery compensate, high voltage, high temperature=1.000000
TX AFC DAC offset=0
[DCS1800 level, ramp]
APC dc offset=158
Low APC dc offset=0
APC lowest power=0
TX power level=24,39,58,78,100,128,160,193,235,282,326,380,445,505,570,640
profile 0 ramp up=0,0,0,0,0,50,30,20,80,145,219,255,255,255,255,255
profile 0 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 1 ramp up=0,0,0,0,0,0,30,20,65,145,219,255,255,255,255,255
profile 1 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 2 ramp up=0,0,0,0,0,0,30,20,60,145,219,255,255,255,255,255
profile 2 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 3 ramp up=0,0,0,0,0,0,30,20,60,145,219,255,255,255,255,255
profile 3 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 4 ramp up=0,0,0,0,0,0,40,20,60,145,219,255,255,255,255,255
profile 4 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 5 ramp up=0,0,0,0,0,0,30,20,60,145,219,255,255,255,255,255
profile 5 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 6 ramp up=0,0,0,0,0,0,30,20,50,145,219,255,255,255,255,255
profile 6 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 7 ramp up=0,0,0,0,0,0,30,20,56,145,219,255,255,255,255,255
profile 7 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 8 ramp up=0,0,0,0,0,0,30,20,50,145,219,255,255,255,255,255
profile 8 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 9 ramp up=0,0,0,0,0,0,30,20,60,145,219,255,255,255,255,255
profile 9 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 10 ramp up=0,0,0,0,0,0,40,20,60,145,219,255,255,255,255,255
profile 10 ramp down=255,239,197,138,78,32,10,0,0,0,0,0,0,0,0,0
profile 11 ramp up=0,0,0,0,0,0,30,20,50,145,219,255,255,255,255,255
profile 11 ramp down=255,239,197,138,78,0,0,0,0,0,0,0,0,0,0,0
profile 12 ramp up=0,0,0,0,0,0,10,20,60,145,219,255,255,255,255,255
profile 12 ramp down=255,239,197,138,78,0,0,0,0,0,0,0,0,0,0,0
profile 13 ramp up=0,0,0,0,0,40,10,20,60,145,213,255,255,255,255,255
profile 13 ramp down=255,242,208,138,78,0,0,0,0,0,0,0,0,0,0,0
profile 14 ramp up=0,0,0,0,0,30,20,20,60,128,227,255,255,255,255,255
profile 14 ramp down=255,230,186,142,78,0,0,0,0,0,0,0,0,0,0,0
profile 15 ramp up=0,0,0,0,0,30,20,20,100,168,220,235,255,255,255,255
profile 15 ramp down=255,230,182,98,0,0,0,0,0,0,0,0,0,0,0,0
Subband max arfcn=520,600,680,730,780,830,885,-1,-1,-1,-1
Subband mid level=7,7,7,7,7,7,7,7,7,7,7
Subband high weight=1.000,0.990,0.980,0.980,0.980,0.980,0.970,1.000,1.000,1.000,1.0000
Subband low weight=0.980,0.990,0.990,1.000,1.010,1.020,1.030,1.000,1.000,1.000,1.0000
Battery compensate, low voltage, low temperature=1.000000
Battery compensate, low voltage, mid temperature=1.000000
Battery compensate, low voltage, high temperature=1.000000
Battery compensate, mid voltage, low temperature=1.000000
Battery compensate, mid voltage, mid temperature=1.000000
Battery compensate, mid voltage, high temperature=1.000000
Battery compensate, high voltage, low temperature=1.000000
Battery compensate, high voltage, mid temperature=1.000000
Battery compensate, high voltage, high temperature=1.000000
TX AFC DAC offset=3

[ADC control]
offset=23286,23286,23286,23286,23286,23286,23286
slope=5524,5524,5524,5524,5524,5524,5524
点评回复

使用道具 举报

 楼主| 发表于 2008-5-16 18:53:18 | 显示全部楼层
setup文件
[Reset RF Function Group]
GSM900 Sig = 1
GSM1800 Sig = 1
GSM1900 Sig = 1
GSM900 NSig = 1
GSM1800 NSig = 1
GSM1900 NSig = 1

[System Setting]
External Reference Clock = 0
CMU Base GPIB Address = 20
Instrument = "CMU200"
Power Supply Address = GPIB0::16::INSTR
CMU RF Port = 2
Debug Mode = 2
Test Mode = 2
FDM database file Line0001 = "e:\\AUX软件\\M250\\M250_00_02shichan(修改闪屏和开机白条20080513)\\BPLGUInfoCusto"
FDM database file Line0002 = "mAppSrcP_MT6225_S00_M250_00_02_SHICHAN"
Calibration file = "e:\\AUX软件\\M876+\\MTKCal.ini"
Config file = "d:\\ATE配置\\Meta_MT6225_最新.CFG"
Report file path = "d:\\"
Database file = "d:\\ate_result.xls"
IMSI = "001011234567890"
POWER ON AFTER CHANGE = 1
Stability Count = 1
Check Testfixture = 0
Fixture COM port = 6
System Cable Loss Calibration = 0
System Input Calibration = 1
System Output Calibration = 1
Special Power Control = 0
Special Power Delay = 1.5
ANRITSU ME7413A = 0
ATD112 Send After Time = 5.0
ATD112 Check Connect Delay Time = 1.5
CMU GPIB BOARD = 0
N4010A Address = 15
MT8852B Address = 27
Instrument WiFi = "N4010A"
Instrument BT = "MT8852B"

[Call Setup Configuration]
Setup Network = 1
GSM Call Setup Channel = 1
GSM BCCH Channel = 32
DCS Call Setup Channel = 512
DCS BCCH Channel = 700
PCS Call Setup Channel = 512
PCS BCCH Channel = 700
BCCH RF LEVEL = -60
BS TCH LEVEL = -81
Triple Band = 0
GPRS TEST = 0
MSlot0 Downlink = 0
MSlot1 Downlink = 0
MSlot2 Downlink = 0
MSlot3 Downlink = 1
MSlot4 Downlink = 1
MSlot5 Downlink = 1
MSlot6 Downlink = 1
MSlot7 Downlink = 0
MSlot0 Uplink = 0
MSlot1 Uplink = 0
MSlot2 Uplink = 0
MSlot3 Uplink = 1
MSlot4 Uplink = 0
MSlot5 Uplink = 0
MSlot6 Uplink = 0
MSlot7 Uplink = 0
MSlot0 Relative Level = 0
MSlot1 Relative Level = 0
MSlot2 Relative Level = 6
MSlot3 Relative Level = 0
MSlot4 Relative Level = 6
MSlot5 Relative Level = 6
MSlot6 Relative Level = 0
MSlot7 Relative Level = 0
MSlot0 Gamma = 3
MSlot1 Gamma = 3
MSlot2 Gamma = 3
MSlot3 Gamma = 3
MSlot4 Gamma = 3
MSlot5 Gamma = 3
MSlot6 Gamma = 3
MSlot7 Gamma = 3
BLER Reference Level = -85
Individual Level BLERS0 = 0
Individual Level BLERS1 = 0
Individual Level BLERS2 = -2
Individual Level BLERS3 = -10
Individual Level BLERS4 = 0
Individual Level BLERS5 = 0
Individual Level BLERS6 = 0
Individual Level BLERS7 = 0
RLC Blocks = 1000
DCS Band = 1
GSM Band = 1
GSM850 Band = 0
GSM850 Call Setup Channel = 128
GSM850 BCCH Channel = 128
Triband Test Type = 0

[Signalling Measurement]
Power Measment Burst = 10
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 1
Timing Error = 1
Modulation Measment Burst = 10
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
ORFS MOD Burst = 10
Spectrum Modulation = 1
ORFS Switch Burst = 10
Spectrum Switch = 1
Rx Quality = 1
RX Level = 1
RFER = 0
BBB = 1
GSM Rx Meas Level = -100
DCS Rx Meas Level = -100
PCS Rx Meas Level = -100
Rx RFER Burst = 128
Rx BBB Burst = 88
GSM Output Loss = 0.5
GSM Input Loss = 0.5
DCS Out Loss = 0.8
DCS Inp Loss = 0.8
PCS Out Loss = 0.7000000000000001
PCS Inp Loss = 0.7000000000000001
Location update timeout = 60
Timing Error Limit = 5
RX Level Limit = 26
RX Quality Limit = 3
Stop Condition = 0
Version New = 0
Final Test With Calibration = 1
Wireless Test = 0
Get Barcode = 0
Manual Check Ber Limit = 1
RX ClassII Limit = 1.5
RX ClassIb Limit = 1.5
Default Test Items = 1
Test Fixture = 1
Code Scheme = 9
Check BarCode Delay = 5
GPRS TEST MODE = 2
Handover Delay time = 0.5
BER MEAS MODE = 0
BER Continuous Meas Delay = 1.5
Mobile Repore RxQ Delay = 1.5
TX Limit Check by Tester = 1
Write pass status to Target = 0
MT Call = 1
GSM850 Rx Meas Level = -100
6218B Normal Baud Rate = 115200
6205B Normal Baud Rate = 57600
RX Level Limit MAX = 35
BLER Limit = 5.0
Change Dual Band Delay = 5.0
Change Single Band Delay = 15.0
BT Inp Loss = 4
BT Out Loss = 4

[Calibration Setup]
GSMN OUT LOSS = 0.5
GSMN INP LOSS = 0.5
DCSN OUT LOSS = 0.8
DCSN INP LOSS = 0.8
COM PORT = 4
Check IMEI = 0
Auto Barcode = 0
Auto Barcode Step = 1
ADC Calibration = 0
AG8960 GSM = 0
Power Supply Type = 3
Frequency Bank with PCS = 0
BB Chip Type = "6225"
CO GSM900 = 65
CO DCS1800 = 700
CO PCS1900 = 660
PCSN OUT LOSS = 0.7000000000000001
PCSN INP LOSS = 0.7000000000000001
Power Measurement Type = 1
Enter META Mode Timeout = 10000
Enter META Timer Delay = 2.0
AFC Calibration = 1
Pathloss Calibration = 1
APC Calibration = 0
APC Check = 1
Frequency Bank with GSM850 = 0
Frequency Bank with GSM900 = 1
Frequency Bank with DCS1800 = 1
Add Calibration Status = 0
Phase Error Calibration = 0
Secondary COM = 8
Third COM = 8
Calibration Second Power On = 5
Crystal AFC Calibration = 1
APC Calibration Full = 0
IP2 Calibration = 0
IP2 Calibration Type = 2
APC Calibration Sky77328 = 1
AFC CW = 0
TX DC Offset Calibration = 0
8PSK FULL = 0
APC EPSK Cal = 0
8PSK TYPE = 1
APC Calibration Renesas = 0
Skip Battery Calibration = 0
Skip Init PowerTable = 0
Skip Crystal TX Offset = 1
PathLoss Extra Delay = 0.05
WIFI TXDC Cal = 0
WIFI TXP Cal = 0
WIFI RF Check = 0
SKY APC DC Cal = 0
APC Extra Delay = 0.0
BT CAPID Cal = 0
TXIQ EPSK Cal = 0
RFMD3159 Cal = 0
PA CAL ENABLE = 1

[IMEI]
IMEI = 12345678901234
Scan IMEI = 0

[Final Test TX Check]
GSM900_MAX_P = "6.0,8.0,10.0,12.0,15.5,16.0,18.0,20.0,22.0,25.0,26.0,28.0,30.0,31.5,34.2,"
GSM900_MIN_P = "4.0,6.0,8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,29.5,31.2,"
DCS1800_MAX_P = "2.0,3.5,5.3,7.2,9.0,12.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,27.0,28.5,31.2,"
DCS1800_MIN_P = "-0.5,1.5,3.3,5.2,7.0,8.0,11.0,13.0,15.0,17.0,17.5,21.0,23.0,25.0,26.5,27.5,"
PCS1900_MAX_P = "0.5,2.5,4.5,6.5,8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.5,28.5,31.0,"
PCS1900_MIN_P = "-0.5,1.5,3.5,5.5,7.5,9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,27.5,28.0,"
GSM850_EPSK_MAX_P = "6,8,10,12,14,16,18,20,22,24,26,27,27,27,27,"
GSM850_EPSK_MIN_P = "4,6,8,10,12,14,16,18,20,22,24,25.8,25.8,25.8,25.8,"
GSM900_EPSK_MAX_P = "6,8,10,12,14,16,18,20,22,24,26,27.8,27.8,27.8,27.8,"
GSM900_EPSK_MIN_P = "4,6,8,10,12,14,16,18,20,22,24,25.8,25.8,25.8,25.8,"
DCS1800_EPSK_MAX_P = "2,3.5,5,7,9,11,13,15,17,19,21,23,25,26.8,26.8,26.8,"
DCS1800_EPSK_MIN_P = "-0.5,1.5,3.5,5,7,9,11,13,15,17,19,21,23,24.8,24.8,24.8,"
PCS1900_EPSK_MAX_P = "2,3.5,5,7,9,11,13,15,17,19,21,23,25,26.1,26.1,26.1,"
PCS1900_EPSK_MIN_P = "-0.5,1.5,3.5,5,7,9,11,13,15,17,19,21,23,24.8,24.8,24.8,"
EPSK_95P_EVM = 15
EPSK_95P_MAGERR = 5
EPSK_95P_PHERR = 5
EPSK_EVM_PK = 30
EPSK_EVM_RMS = 9
EPSK_MAGERR_PK = 17.7
EPSK_MAGERR_RMS = 12.5
EPSK_PHERR_PK = 200
EPSK_PHERR_RMS = 5
EPSK_ORIG_OFFSET = -30.0
G850_Freq_Error_Limit = 85
GSM_Freq_Error_Limit = 90
DCS_Freq_Error_Limit = 180
PCS_Freq_Error_Limit = 190
Phase_Error_Peak_Limit = 20
Phase_Error_RMS_Limit = 5
AG8960_RF_Amptd_Freq_Offset Line0001 = "500000000,641000000,641100000,876000000,876100000,1312000000,1312100000,18800000"
AG8960_RF_Amptd_Freq_Offset Line0002 = "00,1881000000,1882000000,1883000000,1884000000,1885000000,2000000000,-1,-1,-1,-1"
AG8960_RF_Amptd_Freq_Offset Line0003 = ",-1,-1,"
AG8960_RF_Amptd_Value_Offset Line0001 = "-0.5,-0.5,-0.5,-0.5,-0.5,-0.5,-0.7,-0.7,-0.8,-0.8,-0.7,-0.7,-0.8,-0.8,-0.8,-0.8,"
AG8960_RF_Amptd_Value_Offset Line0002 = "-0.8,-0.8,-0.8,-0.8,"
Using Freq Amptd Offset = 1
Spectrum due to switching enable = "1,0,0,1,"
Spectrum due to modulation enable = "0,0,0,1,1,0,0,1,0,0,1,"
GSM850 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
GSM900 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
DCS1800 ORFS_SW = "-15.0,-15.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
PCS1900 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
GSM850 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
GSM850 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
GSM900 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
GSM900 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
DCS1800 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-50.0,-50.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
DCS1800 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
PCS1900 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
PCS1900 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EGSM850 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
EGSM900 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
EDCS1800 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
EPCS1900 ORFS_SW = "-19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0,"
EGSM850 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EGSM850 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EGSM900 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EGSM900 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EDCS1800 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EDCS1800 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EPCS1900 ORFS_MOD Line0001 = "0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
EPCS1900 ORFS_MOD Line0002 = "-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,"
WT4400 Coupling Loss = "801.0,0.6,1701.0,1.2,999.0,0.8,1999.0,1.3"

[Barcode]
Barcode = "MT012345678901234567*9"
Barcode Step = 1
Barcode Limit = "MT012345678901234569"
Barcode Length Limit = 0
Shop Floor Error Hit = 0

[Report Option]
Part Number = "SG6110"
Batch = "01"
Revision = "W04.06"
Serial Number = "MTK00000001"
Report Type Detail = 0
Crystal Vender = "unknow"

[Error Code]
Lacation update Fail = 101
MT Call Fail = 102
Call Drop = 103
Average Burst Power Fail = 104
Peak Burst Power Fail = 105
PVT Match Fail = 106
Timing Error Fail = 107
Phase Error Peak Fail = 108
Phase Error RMS Fail = 109
Frequency Error Fail = 110
Spectrum due to Switching Fail = 111
Spectrum due to Modulation Fail = 112
Rx Quality Fail = 113
Rx Level Fail = 114
BER Fail = 115
METAAPP_OPEN_UART_FAIL = 201
METAAPP_BOOT_FAIL = 202
METAAPP_COM_ERROR = 203
METAAPP_CONNECT_WITH_TARGET_FAIL = 204
METAAPP_DISCONNECT_WITH_TARGET_FAIL = 205
METAAPP_RF_SELECT_BAND_FAIL = 206
METAAPP_RF_AFC_MEASURE_FAIL = 207
METAAPP_RF_PM_FAIL = 208
METAAPP_RF_NB_TX_FAIL = 209
METAAPP_RF_SETBBTXCFG2_FAIL = 210
METAAPP_NVRAM_INIT_FAIL = 211
METAAPP_FILE_READ_FAIL = 212
METAAPP_IMEI_CALCULATE_CD_FAIL = 213
METAAPP_ADC_MEASURE_FAIL = 214
METAAPP_BB_REG_READ_FAIL = 215
METAAPP_GET_VERSION_INFO_FAIL = 216
METAAPP_FAT_OPEN_FAIL = 217
METAAPP_QUERY_TWO_APC_DC_OFFSET_SUPPORT_FAIL = 218
METAAPP_WIFI_SET_TXPOWER_FAIL = 219
METAAPP_WIFI_MAC_ADDRESS_FORMAT_FAIL = 220
METAAPP_BT_ADDRESS_FORMAT_FAIL = 221
METAAPP_TIMEOUT_FAIL = 222
BARCODE_LIMIT_FAIL = 306
AFC Calibration Fail = 501
Pathloss Calibration Fail = 502
APC Calibration Fail = 503
PHASE ERROR Calibration Fail = 504
ADC Calibration Fail = 505
BLER Fail = 116
IP2 Calibration Fail = 506

[GSM 1]
Active = 1
TCH = 975
PCL = 8
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 32.2
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 35
RX Level Min Limit = 27
EPSK MCS = 9

[GSM 2]
Active = 1
TCH = 62
PCL = 8
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 23.0
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 33
RX Level Min Limit = 27
EPSK MCS = 1

[GSM 3]
Active = 1
TCH = 124
PCL = 8
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 13.0
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[DCS 1]
Active = 1
TCH = 512
PCL = 2
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.2
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[DCS 2]
Active = 1
TCH = 700
PCL = 2
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 20.0
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[DCS 3]
Active = 1
TCH = 885
PCL = 2
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 10.0
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 25
EPSK MCS = 9

[PCS 1]
Active = 1
TCH = 512
PCL = 0
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[PCS 2]
Active = 1
TCH = 660
PCL = 0
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.0
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[PCS 3]
Active = 1
TCH = 810
PCL = 0
Output Loss = 0.7
Input Loss = 0.7
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.0
Gold Sample Rx Level = 29
BER measurement level = -104
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[GSM850 1]
Active = 1
TCH = 128
PCL = 5
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.0
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[GSM850 2]
Active = 1
TCH = 190
PCL = 5
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.0
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9

[GSM850 3]
Active = 1
TCH = 251
PCL = 5
Output Loss = 0.5
Input Loss = 0.5
Average Burst Power = 1
Peak Burst Power = 1
PVT Match = 0
Timing Error = 0
Phase Error Peak = 1
Phase Error RMS = 1
Frequency Error = 1
Spectrum Modulation = 1
Spectrum Switch = 0
Rx Quality = 0
RX Level = 0
RFER = 0
BBB = 1
Gold Sample Average Power = 29.0
Gold Sample Rx Level = 29
BER measurement level = -105
BS TCH level = -81
RX Level Max Limit = 32
RX Level Min Limit = 27
EPSK MCS = 9
点评回复

使用道具 举报

52KAIFA
发表于 2008-5-16 21:28:22 | 显示全部楼层
高功率部分功率值没有问题，基本可以说明板子是没有问题的，是不是PA选择不对。配置文件不太能看出来什么的。
点评回复

使用道具 举报

 楼主| 发表于 2008-5-17 09:09:22 | 显示全部楼层
1.主板是绝对没有问题的。因为这个主板用其它工具都可以校过，且我拿的另外几块板子也是此情况。
2.主板用的PA是Sky77518，但ATE 5.5.0上面的PA选项为：GSM Sky77328
                                                                                GSM Reneses
                                                                                GSM RFMD
                                                                                EDGE Sky77316
                                                                                EDGE RFMD
                                                                                GSM Full PCL
                                                                                EDGE Full PCL，我选的是GSM Sky77328，这个有问题吧，那现在支持77518的ATE是多少版本啊，能否发我一个。
点评回复

使用道具 举报

 楼主| 发表于 2008-5-19 08:53:32 | 显示全部楼层
“大部分功率校不过”，此问题已解决，谢谢上面人的提示。但有另外的问题：
1.ADC没有校准，且电源没有受控（电源的GPIB地址是对的），不知是不是哪里配置或设置不对，而且设置里的“Battery/ADC: ADC Cal/PSU Ctrl”，只要一打勾，ATE就会提示找不到电源。
点评回复

使用道具 举报

发表于 2008-5-19 11:00:02 | 显示全部楼层
主板还是有问题，我以前遇到过
点评回复

使用道具 举报

发表于 2008-5-19 11:49:33 | 显示全部楼层
calibrate时,只有ADC Cal这一项是需要程控电源的,其他的测试项目部需要。就是说你如果不需要校准ADC的话，完全可以不用程控电源，用锂电池都可以。

你描述的就是开始校准时电源不能程控，最简单的用measurement&automation search一下设备。如果能找到电源，就在校准前开一下NI Spy，抓一下GPIB口的指令，看看到哪里出错了。还有，电源的程控方式要设置成GPIB,不能设置成RS232；remote fp最好选是dis
点评回复

使用道具 举报

发表于 2008-5-19 13:49:25 | 显示全部楼层
TX power level=45,64,85,109,136,167,200,239,281,334,392,458,532,614,683,683
TX power level=24,39,58,78,100,128,160,193,235,282,326,380,445,505,570,640

修改下看看有没有改善 ，另外你要用5.6.0的ATE工具 ，选择正确的PA类型啊。
点评回复

使用道具 举报

发表于 2008-5-20 08:56:26 | 显示全部楼层
我用的平台和PA类型和楼主相同，
但校准时就是这4项不过，
GSM PCL 19 = 32.03 FAIL,Max :6.50 Min :3.50
GSM PCL 18 = 8.68  FAIL,Max :8.50 Min :5.50
还有
DCS PCL 15 = 31.27 FAIL,Max :2.00 Min :-1.00
DCS PCL 14 = 3.92FAIL,Max :3.50 Min :0.50
到底是板的问题还是校准软件的问题啊，20%的不良率，如果是板的问题，我拿了一块好板和一块不良板的射频部分全部对换了，好的还是好的，坏的还是坏的
点评回复

使用道具 举报

 楼主| 发表于 2008-5-20 13:46:34 | 显示全部楼层
以下是引用starsubcs在2008-5-19 11:49:33的发言：
calibrate时,只有ADC Cal这一项是需要程控电源的,其他的测试项目部需要。就是说你如果不需要校准ADC的话，完全可以不用程控电源，用锂电池都可以。

你描述的就是开始校准时电源不能程控，最简单的用measurement&automation search一下设备。如果能找到电源，就在校准前开一下NI Spy，抓一下GPIB口的指令，看看到哪里出错了。还有，电源的程控方式要设置成GPIB,不能设置成RS232；remote fp最好选是dis

你好，我的电源等联结应该是好的，因为我用META、其他工具校准无问题，所以我怀疑应该是ATE设置哪里不对，请问校准ADC，关键的设置有哪些体现？
ATE5.5.0，我只要把Battery/ADC:ADC Cal/PSU Ctrl打上勾，初始化的时候就提示找不到电源(Can not setup Power Supply)。
另外你说的“remote fp最好选是dis“是什么意思？能否详细说明一下？谢谢。
点评回复

使用道具 举报

tonish
发表于 2008-5-20 20:16:19 | 显示全部楼层
你用的是什么型号电源?,不同型号的电源setup文件里配置是不同的.

Power Supply Address = GPIB0::5::INSTR         //例如2306
Power Supply Address = 5                //2303
另外你有没有安装电源的driver,因为ATE是直接调用电源驱动fp文件的.


[em01]
点评回复

使用道具 举报

发表于 2008-5-23 12:17:08 | 显示全部楼层
你选择全功率校准（GSMFULL PCL）肯定能过，问题出在你的CFG文件上，如果你还选SKY77318的话
就把GSM900_2CAL_PCL = 19, 5改成GSM900_2CAL_PCL = 12, 5
      DCS1800_2CAL_PCL = 15, 0改成DCS1800_2CAL_PCL = 8, 1
应该会好点，
点评回复

使用道具 举报

tonish
发表于 2008-5-23 15:24:25 | 显示全部楼层
楼上说的有理,主要是PA的线性问题,你也可以通过来改下面的参数来保证校准通过.
GSM900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
代表每个功率等级的外部补偿.(PL19-PL5)
点评回复

使用道具 举报

发表于 2008-5-23 18:29:58 | 显示全部楼层
上星期碰到过这样的问题,通过14#和15#所说的结合起来结果测试PASS了.
点评回复

使用道具 举报

发表于 2008-6-12 02:56:41 | 显示全部楼层
一般ATE工具安装都带有一个CFG Fail Editor   偏差不大的话使用这个修改一下    像11楼的问题   我原来也碰到过  还是要从主板上找问题  我不太懂硬件   所以没法详细告诉你
点评回复

使用道具 举报

abc444x
发表于 2009-8-3 22:55:47 | 显示全部楼层
楼主说找不到电源是不是没装ATE的电源驱动啊?
点评回复

使用道具 举报

发表于 2014-6-10 17:12:37 | 显示全部楼层
calibrate时,只有ADC Cal这一项是需要程控电源的,其他的测试项目部需要。就是说你如果不需要校准ADC的话，完全可以不用程控电源，用锂电池都可以。

你描述的就是开始校准时电源不能程控，最简单的用measurement&automation search一下设备。如果能找到电源，就在校准前开一下NI Spy，抓一下GPIB口的指令，看看到哪里出错了。还有，电源的程控方式要设置成GPIB,不能设置成RS232；remote fp最好选是dis
点评回复

使用道具 举报

返回列表 发新帖 回复
高级模式
B Color Image Link Quote Code Smilies

本版积分规则

Archiver|手机版|小黑屋|52RD我爱研发网 ( 沪ICP备2022007804号-2 )

GMT+8, 2024-9-23 04:28 , Processed in 0.048137 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表