【Shenzhen】Automatic Test Equipment Design Engineer

Wolfshui · 发表于 2008-1-25 14:47:15

Job Title: Automatic Test Equipment Design Engineer
Classification: Full-time; Exempt
OBJECTIVE – Provide ATE (Automatic Test Equipment) for electronic products
SUMMARY OF POSITION – Design, build, document, implement, and maintain ATE sets for electrical tests on PCBA’s (printed circuit board assemblies) and electronic products
JOB RESPONSIBILITIES
<UL type=disc>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Establish an ATE process based on industry standards, using available hardware and software, to build an ‘open’ test system</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Work with RSC and CM (Contract Manufacturer) engineers to identify test requirements and process</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Design, build, document and debug ATE sets for performing electrical tests on PCBA’s and electronic products</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Develop electrical and software portions of ATE sets used for mechanical testing</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Design, verify and document ATE test procedures</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Train CM and RSC engineers on ATE use</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Help CM’s implement ATE into production</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Maintain ATE throughout its life, responding quickly to production ATE problems</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Ensure key ATE design and implementation milestones are met successfully</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Create ATE development cost estimates</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt">Prepare RFQ’s and purchases requests for ATE parts and systems </LI></UL>
SPECIFI CATIONS
<UL type=disc>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">At least 4 years experience in designing ATE for electrical testing of PCBA’s and electronic products, including data recording and analysis, given only product and test specifications</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Ability to design ATE using National Instruments and LabView software and equipment, using appropriate bus interface (GPIB, USB, Ethernet)</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Working knowledge of National Instruments, LabView, and Windows-based graphical software to produce operator interface displays and control devices</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Understanding of SolidWorks mechanical design software</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Ability to work on multiple ATE projects simultaneously, meeting the schedule for each</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Ability to work independently and with a team</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Skilled in use of digital voltage meters, oscilloscopes, signal generators and power supplies</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Proficient use of PADS schematic and layout software, Gerber viewer programs, Microsoft Word, Excel and PowerPoint</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Bachelor degree in Electronic Engineering or equivalent experience required</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Oral and written English, Cantonese and Mandarin skills needed to communicate well with both Chinese and American engineers in person, by email and by telephone; minimum CET score of 4.</LI></UL>
ACCOUNTABILITIES 
<UL type=disc>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Ensuring that ATE meets all specifications reliably</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Meeting ATE development and implementation milestones on time and within budget</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l1 level1 lfo2; tab-stops: list 36.0pt">Providing rapid corrective action for ATE problems in production</LI></UL>
RELATIONSHIPS
<UL type=disc>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt">Reports directly to the Director of Automated Test Equipment.</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt">Obtains priorities from SBU Program Managers</LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt">Works with SBU engineers and CM engineers and operators </LI>
<LI class=MsoNormal style="MARGIN: 0cm 0cm 0pt; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt">Works with Mechanical ATE design engineers in development of fixtures and data recording</LI></UL>
Any recommendation please contact <a href="mailtxiaohu2046@hotmail.com" target="_blank" >xiaohu2046@hotmail.com</A>
Thanks!!

Wolfshui · 发表于 2008-9-28 16:47:32

[em01]wish you have a haapy national day!!!

		自动登录	找回密码
密码			注册

[招聘信息] 【Shenzhen】Automatic Test Equipment Design Engineer