|
The LMV1088 is a fully analog dual input microphone array
amplifier designed to reduce background acoustic noise,
while delivering superb speech clarity in voice communications
applications.
The LMV1088 incorporates calibration circuitry which may be
initiated by either an I2C command or by a logic level control
on a separate input pin. The calibration sequence compensates
for gain and frequency response variations of the microphones
used with the LMV1088, eliminating the need to
use expensive matched microphone sets. The calibration data
is stored in the internal EEPROM memory. The LMV1088
has two differential input microphone amplifier channels plus
far field noise suppression (FFNS) processing circuitry. The
amplifiers and FFNS circuitry are adjustable for gain differences
in the MIC channels of +/- 3dB. The frequency response
variations of the microphones over the voice band
frequency range can also be adjusted for differences of
+/-3dB.
The compensation or calibration function is achieved via
memory stored coefficients. These are determined when the
FFNS calibration fuction is activated. The purpose of the calibration
sequence is to choose the optimized coefficients for
the FFNS circuitry for the given microphones, spacing, and
acoustical environment.
Key Specifications
(3.3V supply, unless otherwise specified)
■ Supply voltage 2.7V to 5.5V
■ Supply current 1mA (typ)
■ Signal to noise ratio (A-weighted) 60dB (typ)
■ Total harmonic distortion (A-weighted) 0.1% (typ)
■ Temperature range −40°C to 85°C
Features
■ Low power consumption
■ Neglectable noise suppression processing delay
■ Automatic Calibration
■ Three microphone usage modes
■ Space-saving 36 Bump micro SMD package
Applications
■ Cellular phones
■ Mobile and handheld two-way radios
■ Bluetooth and other powered headsets
【文件名】:0818@52RD_LMV1088.pdf
【格 式】:pdf
【大 小】:1202K
【简 介】:The LMV1088 is a fully analog dual input microphone array
amplifier designed to reduce background acoustic noise,
while delivering superb speech clarity in voice communications
applications.
【目 录】:The LMV1088 is a fully analog dual input microphone array
amplifier designed to reduce background acoustic noise,
while delivering superb speech clarity in voice communications
applications.
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?注册
×
|