|
发表于 2008-3-30 15:35:43
|
显示全部楼层
EVM 95%置信度测试:具体解释如下:(至于仪器是如何实现该项测量的,你可以问问RS,Agilent的人,射频工程师只需要关注指标是否OK就行了)
The maximum acceptable uncertainty of the Test System is specified below for each test, where appropriate. The Test
System shall enable the stimulus signals in the test case to be adjusted to within the specified range, and the equipment
under test to be measured with an uncertainty not exceeding the specified values. All ranges and uncertainties are
absolute values, and are valid for a confidence level of 95 %, unless otherwise stated.
A confidence level of 95 % is the measurement uncertainty tolerance interval for a specific measurement that contains
95 % of the performance of a population of test equipment.
For RF tests it should be noted that the uncertainties in clause F.1 apply to the Test System operating into a nominal 50
ohm load and do not include system effects due to mismatch between the DUT and the Test System. |
|